Knitted Wire Mesh
Knitted Wire mesh is made of either crochet or knitting of various wire materials including stainless steel, copper, synthetic fiber and other materials.

Knitted wire mesh products are applied to those Appli cations including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special service Appli cations.

Our knitted wire mesh is made from all material available in wire shapes for processing of the following parts:
Filters Oil and Air Breather Elements
Catalytic Converter Mesh Insulator Blanket Mesh
Mufflers and Silencers
Copper Mesh Oil-Bath Separators
Mist Elimination Pads Ground Wire Mesh

Main Materials Applied for Knitted Mesh:
Monel knitted wire mesh has good corrosion resistance in all extreme environments and it is reasonably conductive and is tough with high tensile strength, giving good wear characteristics.

Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted meshes, combining low contact resistance with a small degree of permeability. It is not suitable for highly abrasive Appli cations where the TIN plating may wear away to expose the copper. The corrosion resistance of tinned copper clad steel knitted wire mesh is suitable for most Appli cations.

Aluminum knitted wire mesh is mechanically weak and will readily take a compression set and this combined with its readiness to form a non-conducting oxide. Stainless steel knitted mesh is often used as a protective final layer over the other knitted mesh gasket, materials on order to provide a wear-resistant contact surface.

• 
  Knitted Wire Mesh
  
• 
  Knitted Wire Mesh